This turbo will support 700HP on a common rail 5.9L Dodge depending on elevation and turbine choice and flows approximately 88 lbs/minute. By comparison the stock HE351CW with 60mm compressor found on 2004.5-2007 Dodge Cummins 66lbs/minute and will support about 425HP. 2003-2004 HE341 has a smaller compressor and will support less HP.
Injector recommendations for a 2003-2007 5.9L with a big programmer would be 125-150HP Injectors with ECM tuning/ Programmer
Items Needed for Install:
• HX40 to 4.4" HE351 adapter and HX40 Clamp. (part # 35140FL and HX40CL)
• 2004.5-2007 will need Electronic Wastegate Fooler - 1453240
• Oil Drain Gasket
• 2x 3/8 Oil Drain Mounting Bolts
• 2x 3/8" Turbo/Manifold Mounting bolts
• 2x 3/8" nuts • T3 or T4 Turbo/Manifold Gasket
Detailed Build of SXE3G667310N40T4:
• BorgWarner Part #: 13009097049,S300SXE 9180 (S366)
Compressor Wheel Details:
• Compressor Inducer: 66.11mm
• Compressor Exducer: 91.44mm
• Compressor flow: 88 lbs/minute
• Compressor outlet is machined for the 90* elbow (2.91" 2nd gen style flange with elbow and clamp) for fitment on the 2003-2018 Dodge Cummins
• Compressor Inlet: 4"
Turbine Wheel Details:
• Made From Heat Resistant Inconel 713C
• Turbine Exducer: 73.37mm
• Turbine Inducer: 79.76mm
Turbine Housing Detailed Description:
• Turbine Housing Part #: 179905-HX40
• Turbine Size: 1.00AR,
• Turbine Inlet: T4, Divided/Twin Volute, Non gated
• Turbine Outlet: HX40 4.0"
• Actuator: Not applicable
Other Features:
• 360 degree severe duty thrust bearing
• Integrated speed sensor port
• Pre-machined boost port
• Optimized compressor stage aerodynamics
Accessories Included:
• 2.75" Elbow with Tight Radius for 2003-2018 Dodge Cummins
• Clamp for Tight Radius Elbow
• O-Ring Seal for Elbow
• Oil Drain Gasket
• 2x 3/8 Oil Drain Mounting Bolts
• 2x 3/8" Turbo/Manifold Mounting bolts
• 2x 3/8" nuts
• T3 or T4 Turbo/Manifold Gasket